Hanna BL 1.5-1

Max Output		see above chart
Rated Pressure	BL 20	0.5 bar (7.4 psi)
	BL 15	1 bar (14.5 psi)
	BL 10	3 bar (43.5 psi)
	BL 7	3 bar (43.5 psi)
	BL 5	7 bar (101.5 psi)
	BL 3	8 bar (116 psi)
	BL 1.5	13 bar (188.5 psi)
Dosing Frequency		120 strokes/min
Pump Casing		fiber-reinforced polypropylene
Materials		pumphead in PVDF, diaphragm in PTFE, glass ball valves and O-rings in FPM/FKM, polyethylene 5 x 8 mm tubing
Self-priming		max height: 1.5 m (5 feet)
Power Supply		110/115 VAC or 220/240 VAC, 50/60Hz
Max Power Consumption		approximately 200 W
Protection		IP65
Environment		0 to 50°C (32 to 122°F); RH max 95% non-condensing
Dimensions		194 x 165 x 121 mm (7.6 x 6.5 x 4.8’’)
Weight		approx. 3 kg (6.6 lb.)

Kyoritsu, thiết bị đo kyoritsu

Kyoritsu, thiết bị đo kyoritsu

Kyoritsu

Amper Kìm (22)

Đo điện trở cách điện (28)

Đồng hồ vạn năng kyoritsu (12)

Đo điện trở đất (7)

LOOP PFC PSC Tester (2)

Amper kìm đo rò rỉ (8)

Data Logger (4)

Kiểm tra dòng dò (3)

Thiết bị đa chức năng (12)

Phân tích chất lượng điện năng (6)

Đo cường độ ánh sáng (3)

Đo nhiệt độ hồng ngoại (2)

Đo tốc độ vòng quay (2)

Phụ kiện (3)

Kyoritsu 2017

Kyoritsu 2017

Kyoritsu 3166

Kyoritsu 3166

Amprobe GSD600 Gas Leak Detector

The Amprobe GSD600 Gas Leak Detector is a fast responding gas leak detector for methane and propane gas. The meter emits a frequency tone when gas is detected. The frequency of the beep coincides with the concentration of the gas. The LEDs display the level of gas present in an area or room. Pinpoint gas leaks for closed piping systems. Use the mute function in quiet work areas and utilize the LED displays. Or a standard earphone jack for hearing the meter in loud environments.

GSD600

Detects Methane and Propane gas Quickly identifies and pinpoints gas leaks Automatic calibration feature 5 level LED alarm: >40, >80, >160, >320, and >640 ppm Included Accessories:   Battery (installed), carrying case, users manual

Feature	Range
Methane	40 ppm → 640 ppm
Propane	35 ppm → 580 ppm
Sensitivity	35 ppm (propane)

Specifications
Sensor:	Semiconductor
Response time:	< 10 seconds
Warm up time:	< 60 seconds
Auto power off:	10 minutes after last key pressure.
Power supply:	(4) AA batteries; 9V power adaptor (plug specifications: Outer diameter:3.5mm; Inner diameter:1.35mm; Center positive, 500mA maximum). (9V power adaptor not included)
Probe length:	447 mm (17.6 inches)
Range:	Methane 40 to 640 ppm; Propane 35 to 580 ppm
Sensitivity:	35ppm (Propane)
Advantage:	Fast response & high methane sensitivity